Cisco TelePresence Multipoint Switch

AMARA MAGYARORSZÁG KFT. » Webáruház » Videokonferencia » Cisco TelePresence Multipoint Switch

The Cisco TelePresence® Multipoint Switch (Multipoint Switch) allows geographically dispersed organizations to hold Cisco TelePresence meetings across multiple locations reliably and easily. With support for up to 440 telepresence ports in a single meeting across a mix of endpoints, the Multipoint Switch allows all participants to be seen in life-like, high-definition video and heard in CD-quality, spatial audio combined with the industry's lowest latency.
The industry-leading design of the Cisco TelePresence Multipoint Switch delivers voice-activated switching either site-by-site (site switching) or by individual table segment (segment switching). This affordable appliance is also easy to install and manage.
True to the user-friendly Cisco TelePresence design, multipoint meetings are scheduled using enterprise groupware (such as Microsoft Outlook or Lotus Notes), and they start with just a push of a button on the meeting-room endpoint. It is simple-there is no need for support personnel to set up meetings for you. Organizations can connect participants quickly and easily with multiple locations in the same meeting, empowering you to communicate and collaborate like never before.

Features and Benefits of Cisco TelePresence Multipoint Switch




The Cisco TelePresence Multipoint Switch is designed for any sized workgroup to deliver multipoint meetings among Cisco TelePresence endpoints, with support for up to 48 screens on a single server. Additionally, Network Multipoint allows for large meetings with up to 440 Cisco TelePresence ports. Note: The optional Cisco TelePresence System 3000 Series optional HD presentation codec for the auto-collaborate data channel counts as a screen or telepresence port during a meeting.

Impromptu calling

During an active meeting, the conference manager can add another party from the web interface and the participant is automatically connected to the meeting.

Additionally, Automated-Attendant capabilities on the Multipoint Switch allow any Cisco TelePresence endpoint to dial into a scheduled meeting. After you enter the conference ID that the Automated-Attendant requests, you are joined into the appropriate meeting.

High performance and low latency

The high-performance Cisco TelePresence Multipoint Switch server supports very low latency, allowing natural conversation and quick multipoint switching between Cisco TelePresence meeting endpoints.

Audio add-on

Remote, audio-only participants can join a meeting by using the in-room conferencing feature or dialing directly to the meeting using the Automated-Attendant.

Director controls

For special events, custom video controls and audio mixing are available using web-based controls available within the Cisco TelePresence Multipoint Switch web-based application.


The Cisco TelePresence solution supports full media and signaling encryption with no discernable latency to the Cisco TelePresence call. Administrators can designate meetings to be nonsecure, secure best effort, and always secure. Meeting encryption status is indicated on screen at the start of a call or when it changes, and on the endpoint control device at all times.

Video announce

This configurable option allows new participants joining a meeting to briefly be shown to all participants already in the meeting so they know a new party has joined.

Bandwidth management

Automatic camera transmission control significantly reduces network traffic by eliminating the data feeds of nonspeaking meeting participants. Each meeting can be assigned a maximum quality (rate). If a Cisco TelePresence endpoint that has been assigned a lower bandwidth rate joins, the bandwidth rate of the conference automatically decreases.

Comprehensive diagnostics

Diagnostics features include system status information, alarms, downloadable logs (syslog messages), and Simple Network Management Protocol (SNMP) support.

Call detail records (CDRs)

Call records provide meeting start and stop data and participant details. You can export records to a third-party application for manipulation and data sorting.

Meeting controls

The Cisco TelePresence Multipoint Switch provides the following meeting control features for administrators:

• Participant list: Allows you to view a list of all the endpoints in the meeting
• View control: Displays the active speaker or the active room
• Meeting access: Enables or disables other endpoints from joining the current meeting

Product Specifications

Cisco TelePresence Attribute


Call signaling

Session Initiation Protocol (SIP) trunk with Cisco® Unified Communications Manager Version 8.6.2 or later and IP Version 4 (IPv4)

Media protocol

Real-Time Control Protocol (RTCP) and Real-Time Transport Protocol (RTP), User Datagram Protocol (UDP), and IP Unicast

Video protocol

H.264 baseline high-definition television (HDTV) 16:9 aspect ratio

Video resolution

1080p (1920 x 1080 pixels at 30 frames per second [fps])

720p (1280 x 720 pixels at 30 fps)

360p (640 x 480/360 at 30 fps)


Auto-collaboration video

1024 x 768 pixels presentation video at 1, 5, or 30 fps


Advanced audio coding with low delay (AAC-LD/HBR) 22-MHz (CD-quality) audio; 4-channel audio stream; IP Phones and voice-only support with G.711 ulaw

Maximum meeting size

Ability for a single multipoint meeting on a single Multipoint Switch to accommodate up to the total capacity of the Multipoint Switch, which supports 48 video ports

Support for network multipoint up to 11 servers (consuming 3 ports each on the centralized Multipoint Switch acting as a rendezvous point, or 4 ports each when an optional presentation codec is in use for Cisco TelePresence Auto Collaborate) to support a meeting with up to 440 screens

Concurrent meetings

Ability for capacity of Multipoint Switch to be divided into any number of meetings; for example, with three Cisco TelePresence System 1000 systems per meeting, the switch supports 16 concurrent meetings per server; the maximum number of concurrent meetings (with at least two Cisco TelePresence System 500 or 1000 systems) is 24

Latency (Added by Cisco TelePresence Multipoint Switch)

Less than 10 milliseconds (ms)

Jitter (Added by Cisco TelePresence Multipoint Switch)

Less than 0.05%



CDR data

CDR ASCII format

Administrative interface

HTTP and Secure HTTP (HTTPS), Secure Shell (SSH) Protocol, role-based access control (RBAC), and password protection.

Application Programming Interface (API)

Simple Object Access Protocol (SOAP) or XML for real-time (active meeting) conference and participant management

Quality of service (QoS)

Support for Differentiated Services (DiffServ) markings

Az árért kérem, vegye fel velünk a kapcsolatot!


Email cím (nem tesszük közzé) A kötelezően kitöltendő mezőket * karakterrel jelöljük

A következő HTML tag-ek és tulajdonságok használata engedélyezett: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>